Abstract:
The separation of cassiterite mineral as a concentrate from tin ore was carried out by
various gravity separation methods, one of which is using an electrostatic separator with
the type of High-Tension Roll Separator (HTRS). This separation is often an obstacle
because the level of cassiterite (SnO2), which is a HTRS product, does not meet the
requirements for smelting tin ore. The purpose of this study was to obtain cassiterite
levels that meet the requirements of the melting unit, namely Sn ≥ 70%. The method
used in this research is research and development, where the research variable was
carried out from the current condition and developing the research results obtained by
optimization experiments. In addition, this study contributes to the process parameters
of the HTRS separation. Feed was obtained from the jig with the cassiterite (SnO2) level
of 56.97%. Furthermore, the HTRS experimental variable was the feed roll speed varied
from 20, 25 and 30 Hz, while the separation roll speed varied from 10, 15, 20, 25 and 30
Hz. As for the results of the research at the initial stage, the cassiterite (SnO2) concentrate
product ≥ 70% was produce at a variation of the feed roll speed of 20 Hz and 15 Hz
separation roll speed. The results of this study are expected to be use in the processing
unit to obtain cassiterite (SnO2) level that meets the requirements of the smelting unit.
